texture powder coating

Detailed introduction to texture powder coating:

Powder Coating of all texture patterns

Floating Agent L101

L101 can produce pattern types of art, hammer, orange peel, small and large wrinkles and so on. It can be applied in Epoxy and Polyester powder coatings.

Technical data:

Appearance: White or yellow powder

Melting point: 110~120 Celsius degree

Volatile: ≤ 0.3%

Specification and Application
1. The product has been composed of coarse and fine powders, the coarse powder is used for the cubic effect, while the fine powder is used for eliminating shrinkage.

2. Add less amount, make larger texture pattern and add more amount if you want to make small texture pattern. Appropriate amount of 2-methylimidazole will get better cubic effect.

3. The curing temperature has little influence on texture size.
Dosage:  0.2~0.8% based on total amount of coating formula, directly mixed in post production.

L101 can be used for all kinds of thermosetting powder coating. 

Wrinkling agent L102

L102 can adjust the system viscosity and surface tension of the powder coatings in the melting state, so that the coating surface has the wrinkle, art, texture pattern, etc. Different sizes of pattern through different amount. The production process is simple with one-time extrusion, and no need for secondary molding. It also has the good pattern stability and storage stability.

Technical Data

Proprotiont: 1.5-1.6 

Volatiles (%):≤ 0.3

Specification and Application

1. The fine wrinkle pattern can be achieved by adding very small amount of Sand Textured agent L103.

2. The advantage of this agent is that the dosage is small, clear texture effect can be achieved with little amount .

Dosage:  0.2~0.4% based on total amount of coating formula, extruded with the batch.

L102 can be used for all kinds of thermosetting powder coating. Do not add leveling agent and benzoin, etc in the substrate powder., the size of pattern varies inversely with the amount.

Sand Textured agent L103

L103 can play a role of physical separation, which can be used in all kinds of powder coatings. If adjust the formula to match with organobentonite can produce various types of sand texture patterns with all sizes. The fine sand texture pattern used for aluminum sections can be also achieved, the coatings with L103 has good ability of scratch resistance and hardness degree. Less amount, bigger size of pattern.

Technical data
Appearance: White powder
Melting point: ≥ 320 Celsius degree
Volatile content(%): ≤1%

Fineness: 5-7 um

Specification and Application

1. Do not add leveling agent and benzoin, etc in the substrate powder

2. It can produce fine orange peel pattern if using together with wrinkling agent.

3. No need to use matting agent in glossy sand texture powder coatings.

Dosage:  0.2~0.4% based on total amount of coating formula, extruded with the batch.

L103 can be used for all kinds of thermosetting powder coating.

Hammer Tone Agent L105

Hammer Tone Agent L105 can be interacted with aluminum powder in the melting process so that the pigments start convoluting, and arranged in shape of plates or branches. If L105 is extruded together with resin and filler of aluminum powders, it will get a strong sense of transparency and clear texture lines.
Specification and Application

1. The hammer tone effect depends on the resin to a large extent. The appropriate polyester is easy to produce the pattern.
2. The texture pattern will be still very clear even if the amount of the polyester filler is increased to more than 40%.
3. Adding certain amount of surface conditioner L521 or benzoin will also be good for hammer tone, the texture pattern will become larger.
Dosage: 0.1-0.3% based on total amount of coating formula, extruded with the batch.

L105 can be used for all kinds of thermosetting powder coating.

Packaging: Polyethylene lined, multi-ply paper bag, 25kg/bag.

Storage conditions: Keep in cool place; keep away from fire.

Recommended formulation

1. Black sand texture

2.silver gray hammer tone(Epoxy-Polyester Powder Coating)