press brake machinery,plate bending machine,bending machinery

Detailed introduction to press brake machinery,plate bending machine,bending machinery:

1.press brake,press brake manufacturer,hydraulic press brake.

2.Main technical parametrs

   Model:WC67Y-200/3200

   Nominal force                           2000kN

   Length of working table             3200mm

   Distance between uprights        2450mm

   Throat depth                            320mm

   Ram store                               200mm

   Max opening height                  470mm

   Main motor power                    15kW

   Gear pump                              16L/min

   Weight                                    about 11.2 tons

3.The main components and structure of the device

     A.Ram sets   

   WC67K-300*4000 hydraulic nc press brake driven by hydraulic system, ram sets composed of ram, oil pump, mechanical block fine-adjusting device. The oil pumps (left and right) fixed on the rack, hydraulic drive pistons (pole) to move ram up and down.

   B.Working table 

   To operate the buttons on the table to mobile the rack block mobile before and after driven by motor. At same time figure display, the min reading is 0.01mm (The before and after location protected by SQ).

   C.Symmetrical system 

   The symmetrical system composed of twisting axis and arm. The structure is so easy, the function is so reliable, and the symmetrical accuracy is so high.

   D.Block sets   

   Block driven by motor, symmetrical mobile two screws by sprocket. The scales display, and manual fine-adjusting.

4.Service:

     a. Seller in charge of install and do debugging test.

     b. Provide train to buyer

     c. One year guarantee, repaired forever. 

     d. Main components are prestige product with first-class quality.