Use a horizontal scroll in wooden barrels or hex (at both ends of the cylinder diameter 250 mm, 300 mm, the middle part of the test on...
Last update:2012/05/24
Slip Type Life Tester
Detailed parameter: It is used for testing fatigue life of the slip type parts, such like caster, slip door, drawer.
Last update:2012/05/24
Specification
One station
Controller: PLC touch screen control
Printing devices: the Chinese micro-print test report
Last update:2012/05/24
Purpose: To check if each part is the same, loose and weld color fastness
Last update:2012/05/24
Purpose: To check if each part is the same, loose and weld color fastness
Last update:2012/05/24
Purpose: Adjustable desk strength, containing Center load, load and stability testing
Last update:2012/05/24
Formaldehyde is widely used in industry to manufacture building materials and numerous household products.
Last update:2012/05/24
Electronic Crockmeter, to determine the colour fastness of textiles to dry or wet rubbing.
Last update:2012/05/24
All the components are made of stainless steel and are finished in black stoving enamel paint to give them a corrosion resistant finish.
Last update:2012/05/24
All the components are made of stainless steel and are finished in black stoving enamel paint to give them a corrosion resistant finish.
Last update:2012/05/24
Colour matching cabinet will show your true colour. We guarantee that it offers a standardised viewing
Last update:2012/05/24
To determine the surface wetting resistance of fabrics. The appearance of the specimen is compared against an optional...
Last update:2012/05/24
The unit is recommended for Yield Testing i.e. determination of weight per unit area
Last update:2012/05/24
RELATED STANDARD :
IS : 10971 – 1984 : Method for Determination of Pilling Resistance of fabrics.
Last update:2012/05/24
This test method covers the determination of resistance to the formation of pills and other related surface changes on textile fabrics.
Last update:2012/05/24
The method of testing for pilling is suitable for knitted and woven fabrics, made from Staple spun yarn.
Last update:2012/05/24
The tearing strength of fabrics, papers, plastic films, or other similar materials is determined by measurement
Last update:2012/05/24
The specimen rack provides support for the holders in which the specimens are mounted. Its angle of inclination is 450.
Last update:2012/05/24
The test specimen is hold between two round shaped grips.
Last update:2012/05/24
The ability of textiles to recover from creases is determined by measurement of its crease recovery angle.
Last update:2012/05/24
The needle in the gauge stops at the breaking load.
Last update:2012/05/24
Flammability Tester for fabrics consists of a vertical sheet metal cabinet closed on three sides and top and bottom.
Last update:2012/05/24
Humidity Control Fabric to meet ISO/BS standards, 1 piece 250mm (10") X 150mm (6"),
Last update:2012/05/24
DC Blue Wool fabrics available are sold in 25 x 50 cm (10 x 20 inch) pieces.
Last update:2012/05/24
QUALITY ASSURED CONSUMABLES James H.HEAL
DESORIPTON: Impregnated Test papers 100*75mm
TECHNICAL DESCRIPTION:Per Pack(150)
Last update:2012/05/24
ISO Grey Scale
For assessment of change in colour and staining in colourfastness testing 1-5 steps with half steps, in wallet.
Last update:2012/05/24
DESORIPTON: Control Fabrics 100*30mm
TECHNICAL DESCRIPTION:Per Pack(25)
Last update:2012/05/24
Meet to AATCC standard testing method (88B+C, 124, 130, 135, 142, 143, 150, 172 and 179).
Last update:2012/05/24
It is a shrinkage tester appointed by American AATCC
Meets to AATCC standard testing method (88B+C, 124, 130, 135, 142, 143, 150, 172...
Last update:2012/05/24
Audible alarm and automatic agitator shut off
Temperature indication and control with and accuracy of +/-0.25% of controller range
Last update:2012/05/24
Zipper Tester, to determine the resistance to reciprocation of zipper (slide fastener)
Last update:2012/05/24
ICI Mace Snag Tester. To determine the tendency of fabrics to snag(pull yarn loops from fabric) in normal wear(mace snag).
Last update:2012/05/24
Fit for laboratory dyeing and washing fastness test, etc.
Computer can imitate automatically and correctly the actual production...
Last update:2012/05/24
Rattle Test Fixture
To determine whether rattles for infants of up to 18 months old present choking or suffocating hazards.
Last update:2012/05/24
To determine whether accessible sharp points on toys are likely to cause injury.
Last update:2012/05/24
Torque Gauge
To determine whether components of toys can be removed by a certain torque force.
Last update:2012/05/24
To determine whether the pacifiers for infants present choking or suffocating hazards. A pacifier is placed centrally in the opening of...
Last update:2012/05/24
It is used for testing external colour and size alteration of various textiles, knitting fabrics and hot-meltbonded linings
Last update:2012/05/24
To simulate the mechanical damage through an impact action likely to be performed by a child. Assessment of sharp edges,
Last update:2012/05/24
The surface flammability Tester commonly used in the examination down or the superficial knowledge fabric's flammability,
Last update:2012/05/24
