Manufacturer
water treatment
COD analyzer tester
CHEMICAL OXYGEN DEMANDER
Last update:2012/05/14
Formaldehyde Tester
I Application
Formaldehyde mattress mattress tester is mainly applied to formaldehyde, VOC emission test
Last update:2012/05/18
Sofa Durability Tester
It is used to testing the sofa back, seat, and arm's durability.
Last update:2012/05/18
Chair Swivel Testing Machine
Specifications:
According to test Standard: BIFMA X5.1-2002, Test No. 9
Last update:2012/05/18
This machine is suitable for durability testing of wooden cabinets and cupboard's door.
Last update:2012/05/18
Chair Pull Back Impact Tester
Purpose: To check if each part is the same, loose and weld color fastness
Last update:2012/05/18
Caster of Chair Durability Tester
Purpose: For the assessment of office chair in the rotation ability for load conditions
Last update:2012/05/18
Desk Integrate Tester
Purpose: Adjustable desk strength, containing Center load, load and stability testing
Last update:2012/05/18
Drawer durability cycle testing machine. Drawer testing machine. Drawer durability tester. Drawer durability machine.
Last update:2012/05/18
Chair Legs Pressure-resistant Tester
Last update:2012/05/18
Chair Armrest Testing Machine is used to evaluate the pull-resistance ability of the armrest at parallel direction,
Last update:2012/05/18
Testing for mattress on the long-term repeatability of the test load capacity, and the mattress compression deformation
Last update:2012/05/18
Mattress Rollator
Use a horizontal scroll in wooden barrels or hex (at both ends of the cylinder diameter 250 mm, 300 mm,
Last update:2012/05/18
Detailed parameter: it is suitable to all kinds spring soft mattress.
Last update:2012/05/18
Taber Abrasion Performance Tester
This tester applied to do the test of wear-resistant in skin, leather, cloth, paint, paper,
Last update:2012/05/18
Digital Adhesion Meter
Sheen new digital adhesion meter fast, effective and accurate measurement of viscosity, provides an...
Last update:2012/05/18
Measurement of the gloss of all kinds of non-metallic coatings.
Last update:2012/05/18
It is used for testing fatigue life of the slip type parts, such like caster, slip door, drawer.
Last update:2012/05/18
Simulation products in transportation state of environmental assess product packaging design, the rationality and structure strength.
Last update:2012/05/18
ASKER Hard meter F type
Standard: JIS K 7312
Measure range: 0degree~100 degree
Last update:2012/05/18
Formaldehyde Test Chamber
Formaldehyde is widely used in industry to manufacture building materials and numerous household...
Last update:2012/05/18
Chair Seat Impact Testing Machine
Application
This test applies to all types of chairs.
Last update:2012/05/18
Sharp Point Tester
To determine whether accessible sharp points on toys are likely to cause injury.
Last update:2012/05/18
Torque Gauge
To determine whether components of toys can be removed by a certain torque force. A torque-measuring device is
Last update:2012/05/18
Push Pull Gauge
To determine whether the components of toys can be removed by tensile force.
Last update:2012/05/18
ASTM Impact Flooring Medium
A standardised surface onto which a toy can be dropped from a certain height to simulate possible damage
Last update:2012/05/18
EN 71 Impact Flooring Medium
A standardised surface onto which a toy can be dropped from a certain height to simulate possible damage
Last update:2012/05/18
Bite Test Clamp
Simulates a child biting the accessible area of toys.
Last update:2012/05/18
Compression Head
To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by...
Last update:2012/05/18
Rattle Test Fixture
To determine whether rattles for infants of up to 18 months old present choking or suffocating hazards.
Last update:2012/05/18
Pacifier Test Fixture
To determine whether the pacifiers for infants present choking or suffocating hazards
Last update:2012/05/18
Impact Tester
To simulate the mechanical damage through an impact action likely to be performed by a child
Last update:2012/05/18
Accessibility Probes
To determine whether any part or component of a toy can be contacted by the probe
Last update:2012/05/18
Small Parts Cylinder
To determine whether toys & other articles intended for use by children under 3 years old present choking,...
Last update:2012/05/18
Nail Bed Flammable Tester
Used in the detection part of the combustion of flammable hair
Last update:2012/05/18
Test Leakage Needle
Diameter 1MM, the top radius 0.5MM, load 5N, for leakage testing,
Last update:2012/05/18
Kinetic Energy Tester/Projectile Velocity Tester
To determine the size catapults kinetic energy of toys, the
Last update:2012/05/18
Dial Force Gauge
Feature
simple operation
Last update:2012/05/18
Small ball test fixture is use to examine a toy up of whether small ball accessories may result in the child swallow
Last update:2012/05/18
Gauss Meter
Easy to use, simple operation, is KANETEC through the production of magnetic
Last update:2012/05/18
