There are all kinds of sandblast cabinet and sandblast pot which can meet your requirement.
Last update:2012/05/24
floor cleaning machine
Low noise and good price
The motor is produced by the Ametek Company
support is designed with metal
Last update:2012/05/23
Voltage:220V
Power :2.0HP
Rotate Speed:150RPM
Stripping Pad Diameter:17"
Weight:48KG
Power Cord Length:12M
Last update:2012/05/23
1, Aluminum rotomoud
2, LLDPE for rotomolding.
3, cases, tanks,housing,automobile part.
4, Short lead time
5, no pin holes
Last update:2012/05/24
Polishing and Sand blasting equipmentPolishing equipmentLLM-A/P-1/9Sand blasting equipmentLLM-A/P-0/2Detail Spec: As users detail...
Last update:2012/05/07
KAMAT technology high pressure cleaning machine,motor or engine drive, for removing rust & paint,cleaning tube of heat exchanger,etc
Last update:2012/05/14
KAMAT technology high pressure cleaning machine,used for descaling at steel plant, sewer cleaning,water injection at oil field, bigger...
Last update:2012/05/14
Its suitable for washing and peeling vegetable roots like fresh ginger, potato or carrot.
Last update:2012/05/04
Its suitable for washing and peeling vegetable roots like fresh ginger, potato or carrot.
Last update:2012/05/04
Flow Rate:9.2L/MIN 2.4GPM(U.S)
Pressure:150BAR 2200PSI
Rpm:3400R/MIN
Power Require:5.5HP
Dimensions:66×40×60cm
G.W.:38KGS
Last update:2012/05/25
Flow Rate:10.8L/MIN 2.8GPM(U.S)
Pressure:186BAR 2700PSI
Rpm:3400R/MIN
Power Require:6.5HP
Dimensions:55×40×67cm
G.W.:42KGS
Last update:2012/05/26
Flow Rate:15L/min, 4GPM(U.S.)
Pressure:170BAR 2500PSI
Rpm:3400R/MIN
Power Require:6.5HP
Dimensions:61×46×64cm
G.W.:47KGS
Last update:2012/05/26
Flow Rate:15L/min, 4GPM(U.S.)
Pressure:170BAR 2500PSI
Rpm:3400R/MIN
Power Require:6.5HP
Dimensions:55×40×67cm
G.W.:43KGS
Last update:2012/05/26
Flow Rate:15L/min, 4GPM(U.S.)
Pressure:170BAR 2500PSI
Rpm:3400R/MIN
Power Require:6.5HP
Dimensions:66×40×60cm
G.W.:43KGS
Last update:2012/05/26
Flow Rate:15L/min, 4GPM(U.S.)
Pressure:200BAR 2900PSI
Rpm:3400R/MIN
Power Require:9.0HP
Dimensions:74×44×68cm
G.W.:55KGS
Last update:2012/05/26
Flow Rate:15L/min, 4GPM(U.S.)
Pressure:250BAR 3600PSI
Rpm:3400R/MIN
Power Require:13.0HP
Dimensions:74×47×71cm
G.W.:60KGS
Last update:2012/05/26
Flow Rate:15L/min, 4GPM(U.S.)
Pressure:170BAR 2500PSI
Rpm:3400R/MIN
Power Require:DIESEL 178F
Dimensions:74×47×71cm
G.W.:75KGS
Last update:2012/05/26
Flow Rate:8L/MIN 2GPM(U.S)
Pressure:150BAR 2200PSI
Rpm:3400R/MIN
Power Require:5.9HP
Dimensions:55×40×67cm
G.W.:42KGS
Last update:2012/05/26
Flow Rate:15L/min, 4GPM(U.S.)
Pressure:250BAR 3600PSI
Rpm:3400R/MIN
Power Require:DIESEL 186FE
Dimensions:84×53×71cm
G.W.:96KGS
Last update:2012/05/26
Ceramic plunger; Forged brass manifold; NSK bearing; Italy seal; Detergent injection; Air-cooled
Last update:2012/05/26
Ceramic plunger; Forged brass manifold; NSK bearing; Italy seal; Detergent injection; Air-cooled
Last update:2012/05/26
Ceramic plunger; Forged brass manifold; NSK bearing; Italy seal; Detergent injection; Air-cooled
Last update:2012/05/26
Ceramic plunger; Forged brass manifold; NSK bearing; Italy seal; Detergent injection; Air-cooled
Last update:2012/05/26
Ceramic plunger; Forged brass manifold; NSK bearing; Italy seal; Detergent injection; Air-cooled
Last update:2012/05/26
Ceramic plunger; Forged brass manifold; NSK bearing; Italy seal; Detergent injection; Air-cooled
Last update:2012/05/26
Ceramic plunger; Forged brass manifold; NSK bearing; Italy seal; Detergent injection; Air-cooled
Last update:2012/05/26
Ceramic plunger; Forged brass manifold; NSK bearing; Italy seal; Detergent injection; Air-cooled
Last update:2012/05/26
Q58 piled and released type shot blasting machine
Last update:2012/04/26
QH69 shot blasting machine for H-shaped
Last update:2012/04/26
Q69 shot blasting machine for steel profiles
Last update:2012/04/26
QG inner and outer walls of steel pipe shot blasting machine
Last update:2012/04/26
