high frequency electrosurgical generator(high performance)

Nine kinds of output mode:
① Cut: 350W | ② mixed cut 1:250 W | ③ mixed cut 2:200 W | ④ mixed cut 3:150 W | ⑤ coagulation 1:150 W
⑥ coagulation 2:120 W | ⑦ coagulation 3:100 W | ⑧ bipolar coagulation 1:70 W | ⑨ bipolar coagulation 2:70 W
With memory function, and then appears when the power setting last used
With a neutral electrode contact quality inspection system that can detect plate contact area, the system real-time detection and effective assessment of the plate and the skin contact area, contact area if it is found down to a dangerous level, the system automatically cut off the output, and alarm
Large high-definition digital display, the host has an automatic monitoring and has the error function.

Suitable for carrying out various types of invasive surgery, cutting, bleeding use.
Cutting: the pure cut, the effect is cut fine, no fresh tissue surface crusting;
Mixed Cut 1: The effect of cutting with a slight coagulation effect;
Mixed Cut 2: the effect is cut while providing good coagulation effect;
Mixed Cut 3: cut, while its effect is to provide a strong coagulation effect;
Coagulation 1: called soft coagulation, also known as the point of coagulation, a relatively deep layer of tissue coagulation, the role is relatively small; can be used with the endoscope
Coagulation 2: Strong called coagulation, also known as surface condensate, relatively rapid coagulation, the role of the larger;
Coagulation 3: called jet coagulation, can provide effective non-contact coagulation, can be used with the argon gas system;
Bipolar coagulation 1: fine bipolar coagulation can be called, when the power starts to rise slowly until it reaches the solidification effect, can reduce the misuse rate of surgery fine, arrived to improve safety effects;
Bipolar coagulation 2: fast bipolar coagulation can be called in quickly to start the moment the effect of blood clotting, can effectively prevent tissue adhesion;