flexible exterior latex paint

Detailed introduction to flexible exterior latex paint:

flexible exterior latex paints

FW800-quality exterior latex paints have excellent elasticity function of both red and expert waterproof to prevent water infiltration to the wall, excellent elongation flexibility to effectively cover the old and new cracks in walls. Applicable to masonry, gypsum board, concrete and asbestos endures long-term wall decoration. .

Main features:

With a smooth surface, easy-cleaning features, anti-mildew, anti-algae, anti-UV and aging high performance.

Specifications

The color white and a variety of standard color glossy silk

Solid content 42 ± 1% share of 1.25-1.30

Dry film thickness of 75-80 microns Theoretical Coverage 2-3m2/kg (single-pass)

Surface Treatment: The new substrate surface should be dry, clean, no oil, and other fixtures, water content is less than 10%, PH value is less than 8. Have been powder or old paint, walls should be powder surface and peeling off all the old paint removed.

Construction methods: brushing, roller coating or air spray.

Standard package: PW-100 anti-alkali primer again, FW800 Ensemble flexible exterior latex paints 2.

Surface thermometers hard work re-coating time to dry

15 2 hours and 15 hours and 6 hours after

25 1-2 hours and 10 hours and 6 hours after

35 60 minutes 5 minutes 4 hours after

* Construction of the surface temperature must be higher than 5 , relative humidity of not more than 80%

Thinner / cleaning agent: water, dilution rate was not more than 5%.

Construction conditions: construction should be noted that when more than 80% humidity, the temperature below 5 , Do not construction.

To recoat, minimum :2-4 hours (temperature is 23 , relative humidity 50%).

Storage: Store in a cool, dry place, storage temperature is 5-35 . Storage period for the production date of 12 months.

Packing specifications: 25kg / barrel.

Note: to avoid the simultaneous construction of polyurethane paint.