XTM-105H Cutting Machine
1.Dual press start buttons
2 Dual Optical safety sensor
3 Simple operation system
Detailed introduction to XTM-105H Hydraulic Cutting Machine:
XTM-105H Cutting Machine
1.Hydraulic pressure actuation of 1-14MPA, three-phase alternating-current supply, AC380V 50HZ or AC220 60 HZ, total consumptions of electricity of less than 3.7KW(Power supply as per customer request also);
2.Precise four-column three-platen frame, the grad of parallelism between the Active platen and the work platform could reach up to more than 0.08mm under the control mode that the three platen are controled by the four precise guide sleeves;
3.See the adjustable cylinder stroke and the cylinder fixed positioning point, they bring a grad of repeat precision of better than 0.01mm, entirely make sure the cutting precision;
4.Standard area to cut: 520mm*350mm (Very close to the size of a 21 inch LCD display), customized available;
5.Pressing force, stroke of cutting, die height could be adjusted manually;
6.Scope of output: 3tf,5tf,10ft...50ft(Customized available).
Chief applications:
The machine is widely used in a variety of cell phone, digital camera, laptop LCD screen protective film cutting all kinds of stickers, cut half off, etc. for use of non-oriented simple's cutting die, the vast number of mobile phone industry,the computer industry's must-line to the camera equipment.
Technical specifications:
Item
XTM-pro 103
XTM-pro 103
XTM-pro 103
XTM-pro 103
Output/T
1-3
1.5-5
3-10
5-15
Work Table/mm
350*240
350*240
400*300
500*400
Max.Working Height/mm
245
245
300
300
Cylinder Stroke/mm
150
150
200
200
Axle Hole Size/mm
ø25
ø25
ø25
ø25
Power Supply
3ø380VAC,50/60Hz
3ø380VAC,50/60Hz
3ø380VAC,50/60Hz
3ø380VAC,50/60Hz
Motor Power/KW
2.25
2.25
3.75
3.75