Wheel Alignment Car Lift SLA309 ,9000LB/4.0TonFeatures:1. Because of the low drive-on height of the lift the cylinders are nearly horizontal in lowered position. Scissors are provided of a cam lever system to reduce the needed oil pressure at start-u
Detailed introduction to Wheel Alignment Scissor Lift SLA309 9000LB /4.0Ton CE Hydraulic balance alignment lift, Min 96mm:
Wheel Alignment Car Lift SLA309 ,9000LB/4.0Ton
Features:
1. Because of the low drive-on height of the lift the cylinders are nearly horizontal in lowered position. Scissors are provided of a cam lever system to reduce the needed oil pressure at start-up.
2. Lifts run on scissors for high precision wheel alignment. The synchronization is guaranteed by a master&slave hydraulic circuit, which has many advantages:
- no connection shaft; thereby confortable working without any obstacle threshold
- possiblity to have variable width between platforms
3.The wheel free lift is hydraulically operated by the same power unit powering the main scissors and has a maximum lifting height of 400mm above the main platform.
4.When completely lowered the main platform has a minimum height of 220mm which make it very convenient to be installed not only in foundation but also above floor. The on-ground model requires optional drive on-ramps.
Parameters:
Capacity:9000LB/4000KG
Total height:154.0inch/3920mm
Lifting height:77inch/1950mm
Minimum height:4 inch/96mm
Total width max:137.5inch/3491mm
Dirve through width max:98.5inch/2500mm
Dirve through width min:87inch/2200mm
Arm length min:29.5inch/750mm
Arm length max:59inch/1500mm