UV Cabinets Furniture coating
1.fullness good
2. good adhesion
3. high hardness
Detailed introduction to UV Cabinets Furniture coating:
UV Cabinets Furniture coating
1, composition: the paint from the light-cured resin, reactive diluent ,photoinitiator and additives.
2, characteristics and uses: The paint viscosity is moderate, with a low-odor indicators and curing speed. Curing membrane surface smooth smooth, fullness good, good adhesion, high hardness, anti-scratch strong protective effect of the substrate superior performance, excellent weathering performance. Non-toxic side effects on the human body. The paint is cabinets, furniture, ideal topcoat paint.
3, technical indicators:
project | Index |
Appearance and color | No color transparent liquid |
viscosity | 25 14±1S |
Part of solid | 95% |
Speed of solid | 15S |
Luster | 95 |
Adhesion (The grid method) | 100/100 |
Hardness (pencil hardness) | 3H |
Yellowing (1000w UV light irradiation 1h | Non-yellowing, non-shedding |
Flexibility (-20 ~ 80 cycle 72 hours) | No cracking |
Salt Spray Resistance (7 days / grade) | 1 |
4, construction techniques: UV spray finish → IR leveling → UV curing
Pay attention to:
1. Workpiece degreasing dust must be thoroughly, spray room must have a clean air supply, and into the vacuum. To prevent the workpiece handling is not clean or not clean the air affect product quality (dust spots, shrinkage).
2. Compressed air must be cold and dry handling is particularly important in summer, otherwise it will lead to too much moisture can cause paint to whitish, or is the phenomenon of substrate is not linked paint.
3. This product can be used directly, use shall not be mixed with water, oil, any solvents, to prohibit incorporation of diluent into the product.
4. Avoid direct contact with skin, UV paint, the operation should wear protective gloves, glasses and thin films. If the paint accidentally splashed on skin, immediately wash with soap and water, should the redness blistering, immediately to the hospital for medical treatment.