1. CE, EMC, SAA, C-TICK , ROHS, TUV , ETL ,VDE and ISO9001
2. T8 to T5-49w , T5-35w , T5-28w, T5-21w , T5-14w
Detailed introduction to T5 retrofit kit:
T5 Adapter ( T5 adaptor) (T8 toT5) ( T8/T5 ) (T5 Conversion Kit ) ( T5 retrofit kit) Energy Saving fluorescent Light
1) With the same working wattage, adaptor is more brighter than others.
2) Lifespan optional : 15.000hours, 20.000hours, 30.000hours
3) All the European standard quality power factor ( PF ) more than 0.98, and 30.000 hours even can reach to 0.99
4) All required certificates: CE, EMC, SAA, C-TICK , ROHS, TUV ETL ,VDE and ISO9001
5) With intelligent warm start, which gives 2 times longer lifetime for adaptor
6) Capacity optional : gives 49.7 watt to a 49w lamp tube , gives 36.7 watt to a 35w lamp tube , give 27.5 watt to a 28w lamp tube , give 22.3 watt to a 28w lamp tube
7) Voltage optional: 110v ,120v, 220v ,230v , 240v , 277v, and 347v
8) The total current harmonic distortion (THD) in 7%-8%
9) Electronic ballast provide constant light output for mains voltage of 156-256VAC
10) EOL ( end of life detection) it recognises end of lifetime and switches off lamp tube and electronics.
11) Cut off technology:= intelligence that takes care of optimal energy-use and safety.
12) Reflector optional : high parabolic reflector, lower parabolic reflector and without reflector
13) No flammable material, house is 0.5mm thick powdered aluminium, painted white to reduce static , weight is less than 1kg.
14) 50% saving on energy, compared with T8 tube.
15) Environmental friendlier. Solid mercury, 38% less glass compared to T8.
16) Improved light quality , no stroboscopic flickering, which usually causes headache and irritated eyes.
17) The electronic ballasts should complied to the following standards:
EN 60928/IEC 61347 – General and safety requirements
EN 60929 – performance requirements
EN 55015 – Limits and method of measurement of radio disturbance characteristics
of electrical lighting and similar equipment
EN 61000 – 3 – 2 – Limits for harmonic current emissions
EN 61000 – 3 – 3 – Limits for voltage fluctuations and flicker in low voltage supply
systems for equipment with rated current
EN 61547 - EMC immunity requirements