Detailed introduction to Super BAC Self-adhesive Waterproof Membrane:
Super BAC Self-adhesive Waterproof Membrane
Materials:
Isolated film, Self-adhesive Bitumen and Rubber Compound, SBS modified Bitumen, Reinforced Material
The Introduction of Product:
Super BAC self-adhesive waterproof membrane has better physical and mechanical properties so it can satisfy the higher waterproof standard of exposed roofs and some important buildings. It can be applied on more places.
The Features of Product:
1. Excellent physical properties
Good Heat Resistance, flexibility at low temperature and dimension stability make it adapt all kinds of construction environment.
2. Good Weather Resistance can satisfy the requirement of aging-resistance
The product has been added antioxidant, UV absorber and other additives so the chemical stability and aging resistance have been improved.
3. Good bonding strength with cement
4. 2 meters width
2 meters width can reduce the amount of overlap joint to improve the integrity of waterproof system.
5. Convenient in construction
This product can be applied on the wet or uneven substrates; it makes the rainy weather no longer hamper the construction.
6. Safe and Environment- friendly
There is no use of solvent and torch so it avoids environment pollution and fire hazard.
Application Range:
It can be widely applied on the waterproof engineering of roof, basement, tunnel, subway and so on.
Package and Transportation:
It is packed to rolls with plastic belts.
It should be stored in dry and ventilated place.
It should be placed vertically and avoid sunlight and rain.
Available Size:
Super BAC Self-adhesive Waterproofing Membrane | ||
Thickness | 4.0mm | |
Width | 2000mm | |
Self-adhesive | Double-side self-adhesive | Single-side self-adhesive |
Upper Surface | Silicon isolating film | Sand/PE/ Aluminizer/ Aluminum foil |
Lower Surface | Silicon isolating film | Silicon isolating film |
The Technology Property:
This product abides by the standard Q/SZB008-2008.
No. | ITEM | Index | |
Reinforced Material PY | |||
Sand Paper,PET Release paper | |||
1 | Content of Soluble Substanceg/m²)≥ | 2900 | |
2 | Tensile Strength N/5cm ≥ | Longitudinal | 800 |
Transverse | 800 | ||
3 | Elongation at break %≥ | 30 | |
4 | Tear Strength N≥ | Longitudinal | 350 |
Transverse | |||
5 | Water Impermeability 0.3Mpa 30min | Impermeability | |
6 | Heat Resistance ≥ | 95 | |
7 | Low temperature flexibility ≤ | -20 | |
8 | Anti-perforated | Impermeability | |
9 | Lap adhesion N/mm ≥ | Self-adhesive surface and the adhesive surface | 4.0 |
Self-adhesive surface and the aluminum plate | 4.0 | ||
10 | Peel Adhesion N/mm ≥ | 2.0 | |
11 | Adhesion with cement grout N/mm | Lap Adhesion≥ | 6.0 |
Peel Adhesion≥ | 2.0 | ||