RTKe Embedded OS 159dBm Truck Waterproof AVL GPS System

Detailed introduction to RTKe Embedded OS 159dBm Truck Waterproof AVL GPS System:
RTKe Embedded OS 159dBm Truck Waterproof AVL GPS System   Water-proof casing design is a patent can prevent GPS device was damaged by into water, use aviation socket for IO interface, easy to connect with cables; CAN/485 BUS interface, easy to control vehicle; 1 route AD input interface can detect fuel consumption and temperature; especially suitable for engineering truck, special vehicle that run in severe environment.   Main features: ● Based international newest chip, double core structure, build-in RTKe OS, powerful.   ● GPRS and SMS double channels, TCP and UDP double working mode   ● Positioning based GPS reflected wave, assist with base station, strong capacity to prevent blocking to reduce the blind area   ● Three proofing design, Quadruple protection for power source, 4 levels watchdog   ●   Anti-dismantle design for SIM card   ● Low power consumption   ● Build-in high capacity backup battery ●  CAN/485 BUS interface.   ● It can update remotely, easy to maintain   ● Approved by 3C, and approved by national grade quality authentication.   Product functions: 1.Signal detecting and control: 6 routes signal sensor, 7 vehicle status detecting, intelligence mode and forced mode to cut fuel/circuit; user-defined backup output control. 2.   Alarm: 8 alarms, 3 modes of alarm. 3.   Monitoring: vehicleautomatic tracking/monitoring, regions setting, geo-fence, GPS mileage statistics, blind area supplementary report, traces storage, base station positioning. 4.   BUS communication: via CAN/485 BUS to achieve two ways communication between PLC controller and service center, real time monitor vehicle status and control vehicle. 5.   Fuel consumption detecting: build-in AD input interface, equipped floater attenuation cable can measure fuel consumption. 6.   Remote update: main device’s program was support to remote download; user can renew the program remotely. 7.Protection:     Power saving mode: in this mode, GPS device’s working current will drop to30mA@12V when vehicle was in flameout.   Car battery over discharge protection: it will switch to supply power by backup battery if car battery’s voltage is very low (10V). Over voltage protection: it will cut the external circuit to protect GPS device if the voltage exceeds limit value (60V), backup battery can work for 3h.   Performance parameters: - - - -   - - - - - - - - Performance parameter: : | - - - - | - - - - Hardware features |   | Remark | Hardware framework | Adopt double core chip, RTKe embedded OS |   | Communication module | GPRS, SMS double channels module |   | Reliability design | Quadruple protection for power source, 4 levels watchdog |   | PCB protection | Three proofing protection |   | Water-proof design | Water-proof design for casing, water-proof grade IP67 |   | Technical specifications |   |   | Working voltage | 10～60 V/DC |   | Limiting voltage | 100V/DC |   | Car battery protecting voltage | Low: 10V(12V car battery)or 20V(24V car battery)high:60V |   | Power voltage of Anti-reversed connection | ≥100V |   | Average working current | 70mA DC 12V |   | Power saving mode | ＜30mA DC 12V |   | Backup battery | Working time 3h |   | Dimension | 85x 134x 35mm(L x W x H) |   | Canning material | Aluminum alloy |   | Main device weight | 0.35kgnet weight |   | Interface |   |   | GPS antenna | BNC interface: －26dB  cable length: 4m |   | GSM antenna | SMA interface: －3dB  cable length: 3m |   | Vehicle detecting interface | 2 routes(1 route high level, 1 route low level) |   | AD detecting interface | 1 route AD signal input(for fuel consumption detecting GPS device) |   | Communication interface | 1 route CAN BUS 1 route 485 port |   | Data interface | 1 route RS-232 serial port |   | Environment features |   |   | Vehicle spark noise immunity | Discharge voltage 10 kV～20 kV, discharge frequency 20 times/s～200 times/s |   | Electro-transient pulse noise immunity | 4KV, experiment grade IV |   | Static discharge noise immunity | Contacting discharge 6KV, air discharge 8KV, experiment grade III |   | Conduction interference limits | Accord with the requirements of class B |   | Radiated interference limits | Accord with the requirements of class B |   | Temperature characteristic | Working temperature -20 ℃～+60 ℃ Limiting temperature -30 ℃～-20℃, +60℃～+70℃ |   | Humidity | 5％～95％  non-condensation  |   | GPS features |   |   | Tracking sensitivity | －159dBm |   | Positioning time | Cold boot less than 34s; hot boot less than 3.5s; warm boot less than 33s, re-capture time 1.0s |   | Positioning accuracy | 10m2D RMS |   | Speed accuracy | 0.1m/s |   | BS positioning accuracy | 100m |   | GSM/GPRS features |   |   | Frequency | EGSM900/GSM1800 |   | Transmitting power | EGSM900: CLASS4(2W), GSM1800:CLASS1(1W) |   | GPRS | GPRS multi-slot class8－class 10 GPRS mobile station class B Downlink speed: max 85.6Kbps Uplink speed: max 42.8Kbps |   | Data storage |   |   | Trace record storage | 50, 000 trace record |   | Buffer memory for supplemental report (blind area) | 500 (points) tracking info |   | Road detecting storage | Can set 8 roads’ data, each road can be constituted by 1023 broken lines and 256 stations |   | Attribute areas storage | Can set 108 rectangle areas (can set 20 polygon areas) |   | - - - -   Product configurations: 1. Standard configurations 1)       main device           1 pcs 2)       GSM antenna            1 pcs 3)       GPS antenna    1 pcs 4)        Warranty card 5)        Certification 2. Optional configurations 1). Accessories (relay) for cut fuel/circuit 2). Accessories for fuel detecting (floater attenuation cable)   Product picture: