PVC coated fiberglass sleeving

Detailed introduction to PVC coated fiberglass sleeving:

Tradition cotton varnished sleeves (PVC coated FG sleeving) are in white, their main materials are fiberglass, which were wiredrawn, woven and coated with insulation varnish. Thus cotton varnished sleeves were formed. adopting alkali-free glass fiber woven pipe coated with polyvinyl chloride resin through thermoplasticizing into electrical insulators. PVC glass fiber lacquer tubes has better dielectric and chemical resistance, and superior limpness and elasticity. Suitable for electric motors, electrical equipment, instrument and meter, medical equipment, radio, TV set, electric fan, washing machines and other household electrical device wiring insulation and mechanical guarantee. Also used in hotels family decorate wire casing can, can effectively prevent the mice and other home against caused by wire short circuit.

Cotton varnished was in good demand, when wiring (reticle, electrical wire or audio cable) must pass walls or concealed wiring going through beams, to protect the wires, and prevent bitting by mice.

As the technology advanced, this material was developed to many types, and was widely adopted to machinery, automobile, domestic electronics, constructions.

Rated temperature:105 centigrade

The category is in accordance with national standard GB7116-86

Appearance: the coating is evenly covered, surface is smooth, there is no performance fault on the product.

Length: 1000m, tolerance: ±10mm

The inner diameter and thickness will not less than standard data.

Standard:

1.      rated temperature: 105 centigrade

2.    The coats don't break away and crack when bent after heat treatment.

3.    No break away and crack when bent in low temperature

4.    Medium breakdown voltage: 1500v under room temperature.