Low Frequency 3 Phase Online UPS Power System GP9335C(3 Ph in / 3 Ph out)120/160/200/300/400KVA

Model

GP9335C

Rectifier Type

6p

12p

6p

12p

6p

12p

6p

12p

6p

12p

Rated Nominal

120KVA/108KW

160KVA/144KVA

200KVA/180KW

300KVA/270KW

400KVA/360KW

Rated input voltage

380/400/415VAC 3-phase 4-wire

Rated frequency

50/60HZ

Input parameters

Input voltage range

±25%

Input frequency range

45Hz~65Hz

Input soft start function

0-100%   5-300settable

Input power factor

More than 0.98(If harmonic filter is added)

Input harmonic current (THDi)

Less than 4.5%(If harmonic filter is added)

Bypass

Bypass voltage range

-20%~+15%

Bypass frequency range

50/60HZ±10%

Output parameters

Inverter output voltage

380/400/415VAC 3-phase 4-wire

Voltage stability

±1%(Steady status),±3%(Transient status)

Frequency

50/60Hz

Mains power synchronization window

±5%

Actually measured frequency accuracy (internal clock)

50/60Hz±0.01Hz

Output power factor

0.9(Output 90kW per 100kVA)

Transient response time

Less than 5ms

Inverter overload capability

At 0.9 power factor, 110% for 1 hour, 125% for 10 minutes and 150% for 60s

Short circuit current from inverter

3ph 1.5ln for 5seconds,1ph 2.9ln for 5seconds

Maximum Bypass capability

1000% for 100ms

Phase shift

characteristc

With 100% balanced load

Less than 1°

With 100% unbalance load

Less than 1°

Total harmonic

Distortion(THDv)

100% linear load

Less than 1%

100% non-linear load

Less than 3%

System efficiency (full load)

Up to 94% (inverter efficiency is up to 98%)

Rectifier output parameters

Charger output voltage stability

1%

DC ripple voltage

≤1%

Operating environmentt

Operating temperature range

0~40°C

Storage temperature

-25~70°C(Without battery)

Relative humidity

0~95% No condensation

Maximum operating height

≤Elevation 1000m, for elevation above 1000m, derate by 1% for every increase of 100m

Noise (1m)

58-68dB

Protection level

IP20

Standard

Safety: IEC60950-1 IEC62040-1-1 UL1778 EMC IEC62040-2 CLASS C2 EN50091-2 CLASS A Design and Test IEC62040-3