J55-4 chlorosulfonated polyethylene cooling tower moistureproof coating

Physical parameter

Color

Primer: Reddish brown;cover:all colors

gloss

Primer:matt; cover:semi-gloss

Specific gravity

Approx1.05~0.95

Theoretic coverage

Primer:250g/ m2; cover:180g/ m2

Desiccation time

23±2: surface dryness=0.5h, Actual dryness=24h

Absolute solidify

23±2: 7 days

Flash point

A component 10,B component16

Storage

A: 8 months, B: 6 months, C: 12 months

Attention

Ø      Before application ,you have to ckean the surface completely,and ensure the surface is clean.

Ø      stiring the configuration the A component evenly before the coating, then accurate weighing according to the stipulation allocated proportion, stirs even and uses up in the scheduled time

Ø      constrcture must be done after compounds are curing, the adjustment viscosity must use this coating special-purpose diluent, strictly prohibits to use containing mellowly, amine, micro water and free acid solvent, in order to avoid causing the coating deterioration to discard.

Ø      When coating construction, generally does not need to add the diluent, when the coating is too thick ,you may join a little diluents, the quantity  must be controlled in 5%

Ø       the painting process is completely ended, putting the construction into use after the scheduled time maintenance

Ø      This coating is dangerous material, the coating should deposit in cool and dry ,ventilating place, be far away the heat source, avoid the sunlight perpendicular incidence, and isolation kindling material

Ø      Avoid breath solvent vapor long time. Forbidden touching eyes and skin. Supply strong ventilation under narrow or unventilated condition. Protector is necessary.