J23 products widely used precision electronics, communications, computers, household appliances, automobile parts, motor rotor, and other small precision parts stamping process.
Suitable for mass production of sophisticated electronics, metal parts.
Detailed introduction to J23 series punch press machine:
J23 products widely used precision electronics, communications, computers, household appliances, automobile parts, motor rotor, and other small precision parts stamping process.
Suitable for mass production of sophisticated electronics, metal parts.
Seamless special alloy cast iron, high-rigidity and seismic.
Slider to guide long-road design, with the balance slider device, to ensure the functioning of the precision and stability.
Works with any demand for the automation of production, increase productivity and reduce costs.
Balance
1. Transmission center and the center of the machine as a whole line to ensure the accuracy of the press and stable.
2. Slider local use of two balancer to ensure that the machines running balance.
The stability of the high-precision crank, gears, gear shaft, and other parts of friction, are hardened by heat treatment after grinding processing, high wear resistance and balance, performance and stability.
Automated processing, and labor-saving works with any auto-feed mechanism, to automate production, reduce costs and improve efficiency.
Optional configuration
J23 series of open-tilting Press | |||||||
The main technical parameters | Unit | Model | |||||
J23-6.3 | J23-10 | J23-16 | J23-25 | J23-35 | J23-63 | ||
Nominal power | kN | 160 | 100 | 160 | 250 | 350 | 630 |
Nominal power trip | mm | 1 | 1.5 | 2 | 2.5 | 3.5 | 5 |
Slider trip | mm | 45 | 50 | 85 | 100 | 120 | 120 |
Trips | pm | 130 | 125 | 110 | 60 | 50 | 40 |
The largest installed a high modulus | mm | 150 | 180 | 230 | 270 | 260 | 390 |
Die-conditioning capacity installed a high degree of | mm | 35 | 35 | 45 | 45 | 60 | 80 |
Slider to center from the bed | mm | 110 | 130 | 155 | 180 | 250 | 230 |
Size slider bottom (or so before and after X) | mm | 140×160 | 150×170 | 145×180 | 170×230 | 260×290 | 220 × 330 |
Die handle hole size (diameter / depth) | mm | 30/45 | 30/50 | 40/60 | 40/60 | 50/70 | 60/70 |
Table size (before and after about X) | mm | 220×340 | 240×360 | 300×480 | 380×580 | 400x620 | 450x680 |
Thickness of the board table | mm | 45 | 50 | 50 | 65 | 80 | 85 |
Work surface height from the ground | mm | 630 | 650 | 750 | 780 | 760 | 930 |
Electrical power | kW | 1.5 | 2.2 | 2.5 | 3 | 4 | 5.5 |
The largest body angle | deg | 30 | 30 | 30 | 30 | 30 | 30 |
Overall dimensions (X before and after about a high degree of X) | mm | 600×650x1500 | 610×680x1600 | 920×1150 920 | 1050×1350 1050 | 1600×1185 2350 | 1750 |
Machine weight | kg | 560 | 660 | 1150 | 2350 | 1300 | 4200 |