Customers can easily take down from the shelf displays, free to operate and feel the exhibits' features
Detailed introduction to Hot security cellphone /mobile phone display holder /stand with charging and alarm:
1.Product Name: Hot security cellphone /mobile phone display holder /stand with charging and alarm
Model; XST-E430B
2.Technical parameter
1.Product Height: 100 * 65 * 145MM
2.Internal Battery type: 3.7V rechargeable lithium battery.
3.External power adapter: DC5V 1000MA
4.Battery Standby Time: 2 months
5 Charge indicator: charging in red , full in green
6.Alarm sound: 105DB.
7) Alarm indication: LED red flashes.
8) Shell Material: ABS
9) Shell Color: bright black , pearl white
3.Function:
1) Host Base with Charging Function, Charging monthly , Repeated use.
2)Display Charging Function apply to : Mobile Phone , DC camera , Tablet PC
3)Disconnection Alarm Function:Three Contacts disconnection alarm
4)Low Voltage Alarm Function :Voltage Less 3.3V Alarm ,remind the charging
5)Short Circuit Alarm Function : circuit is short-circuited ,automatic alarm
6)Infrared Remote Control Function : Remote Start and Disarm the Alarm.
7)Installation Method : Double ways in 3mm adhesive or use screws tighten.
4.Packaging materials
1).Individual Packing: PE , PCS, the color- box packing , size 170 * 120 * 80MM
2).Carton packing: standard export carton, size: 50 * 35 * 19CM.
3).NW/pc :160G
4).GW/pc:330G
5).NW/CTN: 5.3KG
6).GW/CTN :6.1KG
5.Products list
1 .Hot security cellphone /mobile phone display holder /stand with charging and alarm host base (with a rechargeable lithium battery inside) 1 pcs.
2, Aalarm sensor probe(with a magnetic back, paste 3M adhesive. Extension cords ) 1 set
3, Charger and USB charging cable 1 set
4, Cell phone charging adapter cable 1 pcs
5, Remote control 1 pcs
6 Operation Manual 1pcs
7 Additional 3M adhesive and screws 1 set
6. FAQ and solutions aboutHot security cellphone /mobile phone display holder /stand with charging and alarm
|
Symptom
|
Solution
|
|
1 Turn on the remote control switch, the host no respnse.
|
1.Check the hidden switch on the bottom if in turned on status; 2.Check the host base if out of power , please charge when it\'s run out .
|
|
Alarm is "beep" continuous |
Charge for the Hot security cellphone /mobile phone display holder /stand with charging and alarm |
|
Turn the Announciator , alarm immediately with flashing red LED lights..
|
1, check whether the host seat adpress the counter display 2, check whether RJ plug of the sensor has inserted into the RJ socket behind the host seat the correctly 3, check whether the sensor and displays well-connected, if the adhesive on the sensor and displays have been tripping off, replace the 3M adhesive 4, check whether the small sensor contacts with the exhibit surface well .
|