1,chemical,pressure,temp,resistance,good lubricating
2,specification:0.5mm-30mm
3,wide temperature zone
Detailed introduction to FEP tube in Automobiles&Motorcycles:
PTFE pipe is made by plunger extrusion of suspension polymerized PTFE resin. Among all the existing plastics, PTFE has the best corrosion-resistance and dielectricity
Feature: With the coupling in both ends, the SS braided TEFLON hose has the excellent pressure resistance, can be use in both of high and low temperature. It anti-corrosive, non-stick, and will be long life service.
Inside: PTFE hose, for high and low temperature used, anti-corrosive, non-stick.
Outside: SUS304 Stainless steel braided. Higher the pressure resistance. All kinds of couplings can be
available.
Temperature: Constant use range from -50°C~ +210°C, Instant use: -70°C~ +260°C.
Use: The hydraulic hose, pneumatic hose and steam hose of the industries of Rubber, Plastic, Clothing, Auto, Engine bed, Shipbuilding, Electrical Machinery, Diesel Engine, Papermaking. It will be good performance while transporting the hot&cold alternate liquid, gas, and high corrosive medium compare to other hose, also have the longer life.
Aviation use high performance hose can be customized.
ltem | ID(inner diameter) | Tolerance of ID(mm) | Wall thickness(cm) | Tolerance | length(mm) |
SFG-1 | 0.5 0.6 0.7 0.8 0.9 1.0 | ±0.1 | 0.2 | ±0.05 | >200 |
0.3 | ±0.08 | ||||
1.2 1.4 1.5 1.6 1.8 | ±0.2 | 0.2 | ±0.05 | ||
0.3 | ±0.08 | ||||
0.4 | ±0.10 | ||||
002 2.2 2.4 3.0 3.2 3.4 | ±0.2 | 0.2 | ±0.05 | ||
0.3 | ±0.08 | ||||
0.4 | ±0.10 | ||||
0.5 | |||||
1.0 | ±0.20 | ||||
SFG-2 | 5 6 7 8 | ±0.5 | 0.5 | ±0.10 | 200~1000 |
1.0 | ±0.20 | ||||
1.5 | ±0.30 | ||||
2.0 | |||||
9 10 11 12 | ±0.5 | 1.0 | ±0.20 | ||
1.5 | ±0.30 | ||||
2.0 | |||||
13 14 15 16 | ±1.0 | 1.5 | ±0.20 | 200~500 | |
2.0 | |||||
2.0 | ±0.30 | ||||
2.5 |