ESC-100A for rc aircraft models

Detailed introduction to ESC-100A for rc aircraft models:

Application of ESC: 

Model airplane (including fixed wing, helicopter), model cars (including model vehicles, race cars), model ships, industrial products (including equipment, tools), ESC for medical products (including treatment, health care equipment)

Electrical performance parameters of ESC:

Input Voltage: 2-6 LiPo batteries / 5-18 NiMh batteries 

Continuous current output: 100A

The maximum allowable instantaneous current (10S): 140A

BEC type: SBEC/UBEC/OPTO

BEC output: 5.5V/4A (SBEC), 5.5V/1A-4A (UBEC), 5.5V/1A (OPTO)

Standard configuration: SBEC 5.5V/4A

Shape and weight of ESC:

Dimensions (Length*Width*Height): 67*32*23

Weight: 99G (with BEC), 94G (OPTO)

Positive and negative power wires: wire size10 #; Material: Copper Silicone Wire; Color:+ Red - Black; Length: 100 (mm)

UVW wire: wire size: 12 #; Material: Copper Silicone Wire; Color: U Black V Black W Black; Length: 80 (mm)

Signal wire: wire size: 24#; Length: 280 (mm); Connector specification: 3pin DuPont terminal

Types suitable for T head:     Rubber head Specification: 5.0*20; Type: The power supply side can use  5.0 

Thrum heat shrinkable catheter specification: 6.0*28;         Color: Red, Black 

Heat sink specification: 29*40                                  Color: Silver

Electric heat shrinkable catheter tone specification: 35*80       Color: Red

Manufacturers' standard specification

Parameter settings of ESC:

Brake Setting: On/Off, the default is off;

Setting for battery type: LiPo (lithium) or NiCd/ NiMh (nickel metal hydride / nickel at), the default is LiPo;

Low-voltage protection threshold setting: low / medium / high, the default is medium (3.0v/65%);

Motor timing setting (increase the efficiency and the start stability of the electronic governor): low/medium/ high, the default is medium (3.0v/65%);

Accelerated startup setting (for precision gearboxes and helicopters): (provide the rapid accelerated startup with linear throttle response), the default is soft;

Helicopter mode (for helicopters), the default is off;

Motor steering (clockwise / counterclockwise): forward steering / reverse steering, the default is forward steering;

PWM operating frequency: 8 KHz/ 16KHz, the default is 8 KHz;

Low voltage protection modes (lower power or stop immediately): lower power / immediately stop, the default is lower power.

Standard configuration:

Power line length: 100 (mm)    UVW line length: 80(mm), no rubber head or T head     SBEC 5.5V/4A