Home>Products>EMI Materials
Sourcing Quality Products on GongChang Multilingual Platform :

Español | اللغة العربية | Русский | 日本語 | Français

424 results found for "EMI Materials"

  • Time:
  • Show:
  • View:

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI 9110Decorative trim, solder able trim for decorative glass (e.g. terrariums, tiffany glass).PPI TypePPI 9110Base MaterialCOPPERTotal Thickness0.065 MMAdhesive TypeACRYLICAdhesive CoatingSINGLE FACEDColourNATURALTypical ApplicationsCopper Foil 1

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI RD-033GPPI RD-033G is a heavy reinforced crepe paper masking tape which is highly
conformable. It can resist baking temperatures up to 200oc and also be
removed without leaving any adhesive residue. The reinforcement
prevents tape tearing during

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI 9015Discharge of static electricity, emir shielding, cable
shielding.
UL recognized file number e86214PPI TypePPI 9015Total Thickness0.065mmTypical ApplicationsAluminum Foil 1Electrolytic Corrosion FactorA 1.0

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI RD-481PPI RD-481, based on soft copper foil, is completely moisture resistant. The
adhesive has a high loading of conductive particles and its conductivity
is stable even after aging.PPI TypePPI RD-481Base MaterialSOFT COPPERTotal Thickness0.060m

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI RD-704PPI RD-704 is based on an aluminum foil (0.015mm) and polyester film (0.019mm)
laminate coated with an electrically conductive (z axis only) acrylic
adhesive on the aluminum side and supplied on a silicone paper
interliner.PPI TypePPI RD-70

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI RD-807PPI RD-807 is based on an aluminum foil coated on both sides with a layer of
an electrically conductive, pressure sensitive adhesive. To achieve its
maximum solvent/fuel resistance, the tape must be cured at 150oc for a
minimum of one hour.

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI RD-714PPI RD-714 has been specifically designed as a high temperature resistant,
masking tape for powder coating processes. Its adhesive leaves no
residue during removal from the coated substrate. Resists baking
temperatures up to 220°c.PPI T

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI RD-676-6PPI RD-676-6 is based on a soft copper foil coated with a low-out gassing,
electrically conductive acrylic adhesive. The adhesive has been specially
formulated to be thoroughly cross linked and also low out gassing.PPI TypePPI RD-676-6Bas

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI RD-822PPI RD-822 is based on an aluminum foil coated on both sides with a layer of
an electrically conductive, pressure sensitive adhesive. To achieve its
maximum solvent/fuel resistance, the tape must be cured at 150°c for a
minimum of one h

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI 901PPI 901, based on aluminum foil, is completely moisture resistant.PPI TypePPI 901Base MaterialSOFT ALUMINIUM FOILTotal Thickness0.050mmAdhesive TypeSYNTHETIC RESIN THERMOSETTINGAdhesive CoatingSINGLE FACEDColourALUMINIUMTypical ApplicationsAlu

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI RD-802PPI RD-802 is based on aluminum foil coated with a pressure-sensitive
polysiloxane adhesive.
This tape is supplied on an e liner.PPI TypePPI RD-802Base MaterialALUMINIUM FOILTotal Thickness0.125mmAdhesive TypePOLYSILOXANEColourNATURAL ALUMI

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI 9115PPI 9115, based on soft copper foil, is completely moisture resistant. The adhesive is conductive.PPI TypePPI 9115Base MaterialSOFT COPPER FOILTotal Thickness0.060mmAdhesive TypeSYNTHETIC RESIN THERMOSETTING CONDUCTIVEAdhesive CoatingSINGLE-F

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI LM-190PPI LM-190 is a special laminate ofPPI 9515 and PPI sp-510a supplied on a
silicones paper interliner.PPI TypePPI LM-190Compound TypePPI 9515PPI SP-510ABase MaterialTIN CLAD COPPER FOILPOLYESTERTotal Thickness0.065mm0.050mmAdhesive TypeSYNTH

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI LM-394BPPI LM-394B is based on tin-clad copper foil coated with an electrically
conductive adhesive (PPI 9515-6). The uncoated side of the PPI 9515-6 is
partially covered with a central strip of masking tape (sp-510a). Once
applied to a surface t

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI 1091PPI 1091 is applied directly between the primary and secondary windings and the lead can be point sodered to th copper foil through the polyester film.The solder point should then be covered with a PPI self-adhesiveinsulating tape.PPI TypePPI

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI SP-255PPI SP-255 is a self-adhesive masking tape especially suitable for the
protection of various areas of p.c. boards (such as gold contacts) during
high temperature flow solder processes. It is particularly recommended
for masking edge connect

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI RD-611BPPI RD-611B, based on soft copper foil coated on both sides with a high
adhesion, electrically conductive pressure sensitive adhesive.PPI TypePPI RD-611BBase MaterialSOFT COPPERTotal Thickness0.105mmAdhesive TypeSYNTHETIC RESIN THERMOSETTI

Laird thermal & EMI & Conductive material Pr...

Min. Order: Bulk

Intro: Laird thermal, EMI shield and conductive materialOur thermal management products and thermal interface materials include gap fillers (including putties), phase change materials, thermal grease, thermally conductive circuit boards and thermally conduc

PPI EMI Shielding Tape

Min. Order: Bulk

Intro: PPI RD-776-6PPI RD-776-6 is based on aluminum foil coated with a silicone adhesive. This
silicone adhesive has both temperature and chemical resistance.PPI TypePPI RD-776-6Base MaterialALUMINIUM FOILTotal Thickness0.110mmAdhesive TypeSILICONETypical

3M EMI Tapes-Aluminum Foil Tapes

Min. Order: Bulk

Intro: 3M 1120 Aluminum Foil Tape This tape has a 2-mil smooth aluminum foil backing coated with a conductive acrylic pressure-sensitive adhesive. This tape comes linered on a 3-inch paper core for easy die-cutting. Its acrylic adhesive has good resistance

Go to PageGo