DP- 627  LEDs rechargeable reading table lamp, desk lamp, flash light

Detailed introduction to DP- 627  LEDs rechargeable reading table lamp, desk lamp, flash light:

 Features:

•This product can be used directly AC220V.

•Rated capacity: more than 1600mah.

•Long life battery could be cycling used more than 500 times

•Beam Type: strong and light brightness are adjustable.

•Body Material: Non-Conductive Polymer

•30pcs super-bright white LEDs lasts up to 50,000 hours

•8" neck flexes, so you can position the light right where you want it.

Specifications:

•Charge reated voltage: AC90 ~ 240V  50/60Hz

•Output light source power: 2.1W

•Run Time: max 13hours

•Bulb Type: 30 LEDs

•Beam Color: White

•Certificate: CCC CE CQC

Packing:

•Pcs/Carton: 30*1=30pcs

•Wg=23.1kg

•Carton dimension: 64.2*44.2*39.2cm

Instruction:

n         During charging, push the function switch to "charge" position. Make sure the power switch is off state. Connect the power wire to the desk lamp, and the other side connect to AC220v socket. The power indicator turns RED, and charging indictor is Green, that means it is charging, After about 8hours, it if full. Press the power switch during charging, the LED light is off. Either power off, or the power wire is not connect to the power socket, You can turn on the lighting function. Used with build-in battery. Push the switch to the other side of "charge" and press the poer swith of the table lamp, you can select strong or dim light and off.

n         The first point is for 30LED soft light, the second point is for 30 LED strong, upwards is for Off.

n         After charging fully, it could be used contiguously about 13hours with 30LED soft light and 5 hours with 30 LED strong light.

n         Directly use AC220V,Please push the switch to 220V, connect the power wire to AC220V power socket, Press the press the poer switch of the desk lamp, you can select strong r dim light, while use AC 220V, because of the build-n transformer, it is normal the desk lamp is heating.

n         When the led bulb is dark during usage, that means battery is at the stage of discharging. At this moment, in order to protest the battery, please stop using, and charge it in time.(please charge before the led bulb is dark fully, otherwise, it would damage the battery).