Casstte WDM Media converterAPT-103WS36/56MC singlemode single-fiber's transmit photosignal is wavelength
1550nm, receive photosignal is wavelength 1310nm; Single-fiber dual-direction media converter
Have one RJ-45 interface and one SC single-fiber
Detailed introduction to Casstte WDM Media converter:
Casstte WDM Media converter
APT-103WS36/56MC singlemode single-fiber's transmit photosignal is wavelength
1550nm, receive photosignal is wavelength 1310nm; Single-fiber dual-direction media converter
Have one RJ-45 interface and one SC single-fiber interface, separate for use to connecting
Twisted-pair and fiber. Single-fiber media converter have 6 LED indicator: FX,TX100, FX Link/ACT, TX Link/ACT, FEF,PWR.
Technical paramter
1. Accord with IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.1q 100Base-T, 100Base-TX, 100Base-FX standard.
2. Support TCP/IP PPPOE DHCP ICMP NAT protocol
3. Flow control mode: Full duplex adopt IEEE802.3X, half duplex adopt Backpressure's standard.
4. Electricity port support auto-negotiation function, autoregulation transmit mode and transmit speed.
5. Prot supply Auto-MDI/MDIX automatic reverse.
6. Support storage transmit mode
7. Support electricity port's 10M 100M mode or self-adapt mode's switch.
8. Afford of state indicator, external power(output 5V-50Hz 1A)
9. Interface: Electric port RJ-45 fiber port: SC
10. Twisted-pair: CAT. 5 CAT. 6
11. Singlemode fiber: 8/125, 8.3/125, 9/125µ M
12. Working temperature: 0~50degree
13. Storage temperature: -20~70degree
14. Humidity: 5% ~ 90%(noncondensing)
15. Size: 32*128*158mm (H*W*L)
16. Lightning protection
Specification Connect type: SC
Fiber type: Singlemode
Wavelengh: 1310/1550nm
Typical distance: 60KM
Min TX PWR: -18.0dBm
Max TX PWR: -8.0dbm
Sensitivity: <-30dbm
Link budget: 12.0dbm