1.high hardness,good toughness and sharp shapr in size
2.widely used as refactory materials
3.rich experience in manufacturing
Detailed introduction to Brown Fused Alumina Grains F240-1200:
Brown Fused Alumin, the common name, also known as carborundum, is bauxite, carbon materials, iron filings after three materials in the furnace to melt reduction in the system of artificial corundum brown.It is mainly used in refractories, grinding wheel. 1.ok sand blasting - abrasive hardness, high bulk density, no free silica, heavy, good toughness
Abrasives grade:
Grit size: 16#,20#,24#30#,36#,46#,54#,60#,80#,100#,120#,150#,180#,220#
Micropowder:240#,280#,320#,360#,400#,500#,600#,800#,1000#,1200#,1500#
2000#,2500#,3000#,4000#
Refractory grade:1-0mm,3-1mm,5-3mm,5-8mm -200mesh,-240mesh,-320mesh
|
Purpose |
Specification |
Chemical Composition(%) |
Magnetic material content(%)max |
||||
|
Abrasives grade |
Al2O3min |
Fe2O3max |
SiO2max |
TiO2max |
|||
|
grain |
12-80 |
95 |
0.3 |
1.5 |
3.0 |
0.05 |
|
|
90-150 |
94 |
0.3 |
1.5 |
3.0 |
0.03 |
||
|
180-220 |
93 |
0.3 |
1.5 |
3.5 |
0.02 |
||
|
micropowder |
240-4000 |
92.5 |
0.5 |
1.8 |
4.0 |
_ |
|
|
Refractory grade |
Group Size |
0-1mm 1-3mm 3-5mm 5-8mm |
94.5 |
0.3 |
1.5 |
3.0 |
_ |
|
Fine Powder |
-180mesh -200mesh -240mesh -320mesh |
93.5 |
0.5 |
1.5 |
3.5 |
_ |
|
|
color |
Dark brown |
||||||
|
Hardness(mohs) |
9.0 |
||||||
|
Melting point(°C) |
2250 |
||||||
|
Maximum service temperature(°C) |
1900 |
||||||
|
Ture density(g/cm3) |
3.9 |
||||||
Hardness (mohs): 9.15
Melting point (°C): 2250
Maximum service temperature (°C): 1900
True density (g/cm3): 3.9
Material: alumina
|
color |
Dark brown |
||||||
|
Hardness(mohs) |
9.0 |
||||||
|
Melting point(°C) |
2250 |
||||||
|
Maximum service temperature(°C) |
1900 |
||||||
|
Ture density(g/cm3) |
3.9 |
||||||