Art decorative epoxy powder coating:
1.Non-toxic
2.Excellent decorative appearance
3.High hardness
4.Good quality low price
Detailed introduction to Art decorative epoxy powder coating:
The feature of Art decorative epoxy powder coating:
This is the base coating.It can be widely used in furniture,metal door, and any other metal products with big flat surface.It has perfect performance,effective decoratioin.
Products of different gloss are available, namely, high gloss(about80), semi gloss(50-80), flat gloss(20-50),and no gloss(below 20).The gloss can be adjusted according to the customers' demand
Physical properties of the powder
Density:1.4-1.7g/cm3
Granularity distribution 100 below 100 (It can be adapted to the specific demand of the coating)
Curing Condition
Depending on the types of different products. For detail information,please check the instruction book attached to our products.
Coating performance
|
Testing items |
Standards and methods |
Inspecting index |
|
Impact strength |
GB/T1732-1993 |
50/ |
|
Adhesion |
GB/T9286-1998 |
Grade0 |
|
Bending resistance |
GB/T6742-1986 |
2 |
|
Pencil hardness |
GB/T6739-1996 |
1H-2H |
|
Salt mist resistance |
GB/T1771-1991 |
500h |
|
Heat moist resistance |
GB/T1740-1979 |
1000h |
|
Heat resistance |
110/24h(all color) |
Good gloss retention, Aberration<0.3-0.4 |
|
Attention 1: The tests above used the cold rolling steel plate of 0.8mm thick with preceding standard treatment.The thickness of the coating layer is 60-80um. 2:The above performance index may slightly vary with the variation of the product types and artistic effects. |
||
Average coating rate
A. Smooth Surface:
6-12 square meter /kg, film thickness 60μm(calculated according to 100 consuming of powder coating)
B. Texture Surface
5-7 square meter /KG,film thickness is about 80-120μm
Package
The package of carton, the bag in the double deck polyethylene of inside lining.
Storage
The products should be stored in ventilated dry and clean room with the temperature below 30°C.Not to be close to fire and heat and kept out direct sunlight.Outdoor stacking is prohibited. On the conditions above. The products can be stored stably for 6 monthes.The product beyond the date of guarantee should be reexamined,and it can still be used if the inspection pass muster.
Avoid inbreathing dust when using the products though the powder coatings are nontoxic.The operations are suggested to wear protective glasses and respirators. Avoid long-term skin touch with the powder if possible.
Attention
This technical data is only for user reference,the concrete index is to measure under the terms of suring, in case of the problem can not be solved, please contact the technology department of our company