Product Description
This product is a high-performance USB interface, mobile power, using high-quality ultra-thin Li-Polymer batteries designed, good security; built-in comprehensive protection circuits and high-precision power management functions; by matching a connector or use a peripherals USB data line can be used to charge for peripherals ; very convenient to use anywhere, anytime to solve your digital devices without electricity troubles.
Package Contents
1. One EM-5518 Battery
2. One USB retractable cable
3. Output Adapter (Standard Configuration Adapter: Mini USB, other Output Adapters can be customized by
customer's request)
4. One Specification
Application Scope
All IPOD series MP3 player and all charging devices with a USB interface s,uch as mobile phone, iPhone, PSP, IPOD, MP3,MP4, PMP, GPS, Bluetooth, digital cameras.
Instructions:
Electricity Display: There are four LED instructions on thepane, after press switch the MCU test the battery electricity status, the four LED are directed in 5 paragraph : "100% -75% / 75% -50% / 50% -25% / 25% -10% / ≤ 10% "(when the electricity is 25% -10%, the last one LED light, when electricity ≤ 10% the LED blinking frequency in 0.5Hz), electricity indicator light duration: 20Sec;
Charge Display: after the mobile power access charger MCU indicate the battery status according to the amount of charge, (eg: when the battery is charged into 78% electricity LED1-LED3 light) if the battery is not charge filled, the corresponding LED blink frequency in 1HZ;after the charge is completed, four LED all light, after takes off from charger the light will extinguish;
Discharge operation and discharge capacity instructions: After you press the switch, 4 LED light according electricity proportion, connect the USB output of mobile power to peripherals (mobile)within 20Sec, or the first to connect USB output to peripherals, and then press the switch, mobile phone can also enter charge state; during the battery charging for mobile phone the LED indicate battery capacity state all the time; (for example: 73% electricity remain the LED1-LED3 light, LED4 extinguished; when electricity ≤ 10%, the last LED blink frequently in 0.5HZ to indicate low power warning)
Sleep Model: after 20Sec in the absence of any action (that is, without charge or discharge or touch switch), MCU automatically enter sleep model, reduce power consumption; in the discharge state, when the peripheral fully charged, and the charge current is less than 50mA, external battery automatically turn off and enter sleep model.
