10/100M WDM media converter
1.10/100M fiber media converter
2.external supply
3.Single mode
4.transmission:0-120km
Detailed introduction to 10/100M WDM media converter:
The Fiber media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.
Main Features:
Support IEEE802.3u 10/100Base-TX/FX IEEE802.3X protocol.
With the function of automatic recovery to prevent system halt.
Indicate the working status.
Avoiding the interference of electromagnetic wave, Radio Frequency and terrestrial current.
Optional inside and outside power supply.
No adjust electrical and optical environment.
LED indicator light shows the working performance status.
Duplex Mode:
Fiber Media Converter supports full duplex and semi duplex modes, 10/100Mbps automatic protocol.
Inserting to 14 slots Rack with play and plug.
LED status indicator light makes easy diagnosing network and checking troubleshooting.
Good flow control and reset fuction prevent system halt.
Transmission Distance:
MM(Multi mode): within 2 KM
SM(Single mode):20KM,40KM,60KM,80KM,.100KM
Single Fiber 1310/1550 WDM
Environment Parameters:
Working Temperature: 0℃~65℃
Storage Temperature: -40℃~+85℃
Humidity: 5%~90%
Other Parameters:
Inside Power Supply Dimesion: 160mm*110mm*30mm
outside Power Supply Dimesion: 110mm*70mm*30mm
Rated Voltage: AC220V/50Hz
Inside Power Supply: AC 220V/1A
Inside Power Supply: DC 5V/1A